Comments for Nullsession.com http://nullsession.com Sometimes IT works Mon, 12 Nov 2012 22:23:26 +0000 hourly 1 http://wordpress.org/?v=3.5.1 Comment on The blue badge! by Dick Svensson http://nullsession.com/2012/11/the-blue-badge/#comment-575 Dick Svensson Mon, 12 Nov 2012 22:23:26 +0000 http://nullsession.com/?p=2015#comment-575 Hi Jocke!

First of all I have to say congrats, I will look forward for your coming posts, even though I don’t think this will be beneficial for your blog, probably a lot of NDA and stuff but we will see.

One note, “jonas (at) microsoft.com” sure that’s right ?
/regards
Dick

]]> Comment on Adding your key to Windows 8 for successful activation by Private Dancer http://nullsession.com/2012/08/adding-your-key-to-windows-8-for-successful-activation/#comment-415 Private Dancer Thu, 16 Aug 2012 15:36:30 +0000 http://nullsession.com/?p=1945#comment-415 Thanks for the quick, and effective, solution!

]]> Comment on SWE: TechDays 2012 – Hyper-V 3.0 by Peter http://nullsession.com/2012/05/swe-techdays-2012-hyper-v-3-0/#comment-242 Peter Wed, 23 May 2012 12:28:46 +0000 http://nullsession.com/?p=1526#comment-242 Citatet “Jag har aldrig varit full i Örebro” kommer att förfölja dig ;)

]]> Comment on On the right track? by Kristofer Ohman http://nullsession.com/2012/05/on-the-right-track/#comment-240 Kristofer Ohman Tue, 22 May 2012 18:10:51 +0000 http://nullsession.com/?p=1802#comment-240 The contrasts between colors are a bit to harsh for my taste.
The layout is ace!

]]> Comment on The famous Microsoft iSCSI target by Joachim Nässlander http://nullsession.com/2008/05/the-famous-microsoft-iscsi-target/#comment-36 Joachim Nässlander Tue, 08 May 2012 06:49:09 +0000 http://www.nullsession.com/?p=148#comment-36 Hi!

At http://support.microsoft.com/kb/2535811 you can find the support organisations quick list over what’s supported and not. At first glance I couldn’t find anything about DC’s but that might be the case. I’d recommend you setup Hyper-V on your DC machine and install a virtual non-clustered DC. Then you can install the iSCSI target on that machine when it’s demoted, and after that you can setup your cluster.

]]> Comment on The famous Microsoft iSCSI target by Vinod http://nullsession.com/2008/05/the-famous-microsoft-iscsi-target/#comment-35 Vinod Fri, 04 May 2012 07:01:18 +0000 http://www.nullsession.com/?p=148#comment-35 My setup has a domain controller(acts as storage server, as well) with two nodes(acts as Application servers) linked to it. All running Windows server 2008 R2…
I tried installing iSCSI target on domain controller. During the installation process, an error message pops up saying “There is a problem with this windows installer package” and rollsback the installation.
But, if I happen to install using same package in each of the nodes the iSCSI target gets installed. Why so…???
Is it because the storage server is also my domain controller…???
Can I run iSCSI target in my application nodes and Initiator in the Storage server(domain controller) for Clustering feature…???

Please help.
Thankyou in Advance.

]]> Comment on Enable CPU Core Parking by Joachim Nässlander http://nullsession.com/2009/10/enable-cpu-core-parking/#comment-148 Joachim Nässlander Sat, 21 Apr 2012 09:34:32 +0000 http://www.nullsession.com/?p=799#comment-148 One core will always be “unparked” since we need someone to wake the others up. If I understand you correct you want to turn cpu parking off?

]]> Comment on Enable CPU Core Parking by umesh http://nullsession.com/2009/10/enable-cpu-core-parking/#comment-147 umesh Fri, 20 Apr 2012 04:42:35 +0000 http://www.nullsession.com/?p=799#comment-147 The above command did not work on windows 2008 R2 server :( . All the CPUs except one were still parked.

]]> Comment on Deploying Windows at multiple locations with TFTPD and MDT by Joao http://nullsession.com/2010/03/deploying-windows-at-multiple-locations-with-tftpd-and-mdt/#comment-196 Joao Mon, 02 Apr 2012 12:45:52 +0000 http://www.nullsession.com/?p=1005#comment-196 Nice paper man!

]]> Comment on Running Hyper-V Server 2008 R2 from USB by dtgmap http://nullsession.com/2009/09/running-hyper-v-server-2008-r2-from-usb/#comment-142 dtgmap Wed, 21 Mar 2012 18:36:32 +0000 http://www.nullsession.com/?p=654#comment-142 Thank you so much. This worked perfectly. FYI…if anyone is doing this to install an OS on a PowerEdge T410, just plug the USB in the front, boot, select F11, and then go to the HDD option…the USB will show up and you can install the OS.

]]> Comment on Creating Broadcom teams automatically by RJS http://nullsession.com/2012/01/creating-broadcom-teams-automatically/#comment-219 RJS Mon, 19 Mar 2012 12:43:11 +0000 http://www.nullsession.com/?p=1353#comment-219 Thank you very much.. this script was very much usefull…

]]> Comment on Running Hyper-V Server 2008 R2 from USB by gkakas http://nullsession.com/2009/09/running-hyper-v-server-2008-r2-from-usb/#comment-141 gkakas Sun, 08 Jan 2012 19:26:07 +0000 http://www.nullsession.com/?p=654#comment-141 This is a small tool to create Hyper-V R2 bootable USB sticks.

http://www.cite.gr/cite/?q=node/17

I have not tested it thoroughly yet, but seems to work on two systems (x64).

Does almost same thing as this article describes, but it is not based on this article.

]]> Comment on Configuring NIC teaming with Intel prosetcl by Configuring NIC teaming with Intel prosetcl | Network and System Blog http://nullsession.com/2011/03/configuring-nic-teaming-with-intel-prosetcl/#comment-217 Configuring NIC teaming with Intel prosetcl | Network and System Blog Wed, 30 Nov 2011 00:56:57 +0000 http://www.nullsession.com/?p=1255#comment-217 [...] Configuring NIC teaming with Intel prosetcl Posted on 29 novembre 2011 by brujah10 Configuring NIC teaming with Intel prosetcl. [...]

]]> Comment on SQL Server 2008 on Server Core 2008 R2 by Joachim Nässlander http://nullsession.com/2009/06/sql-server-2008-on-server-core-2008-r2/#comment-84 Joachim Nässlander Mon, 17 Oct 2011 14:02:01 +0000 http://www.nullsession.com/?p=414#comment-84 Thanks for all the comments, have updated the post now so everything should work “out of the box”!

]]> Comment on Lots of stuff happening! by Danne http://nullsession.com/2011/09/lots-of-stuff-happening/#comment-218 Danne Sat, 01 Oct 2011 07:25:04 +0000 http://www.nullsession.com/?p=1338#comment-218 It seems as life works out allright for you my friend.
If you wanna share some scripting knowledge or just drink a beer sometime, holla! 0704340349. Ps. Mycket vatten har flutit under broarna sen sist vi sågs! Vore stört kul att hänga nögon gång!

//Danne

]]> Comment on SQL Server 2008 on Server Core 2008 R2 by sedlin http://nullsession.com/2009/06/sql-server-2008-on-server-core-2008-r2/#comment-83 sedlin Wed, 28 Sep 2011 10:16:43 +0000 http://www.nullsession.com/?p=414#comment-83 Thanks for nice post!
If you use parameter “TCPENABLED=1″ you do not have to modify registry.

]]> Comment on SQL Server 2008 on Server Core 2008 R2 by Server Core and SQL Server | Hyper-V according to me http://nullsession.com/2009/06/sql-server-2008-on-server-core-2008-r2/#comment-82 Server Core and SQL Server | Hyper-V according to me Mon, 26 Sep 2011 07:07:21 +0000 http://www.nullsession.com/?p=414#comment-82 [...] I’m currently building a new lab at my new employer and one of the things I wanted to try out was running SQL Server 2008 R2 on Server Core R2. It’s not totally straightforward, and most importantly not supported by Microsoft, but Joachim Nässlander has all the details in his blog. [...]

]]> Comment on NIC Teaming in Server Core or Hyper-V Server by Joachim Nässlander http://nullsession.com/2010/08/nic-teaming-in-server-core-or-hyper-v-server/#comment-205 Joachim Nässlander Tue, 23 Aug 2011 11:02:07 +0000 http://www.nullsession.com/?p=1087#comment-205 Seems like all vendors have their own supported solutions but in my case I’m only interested in if it’s technically possible…

]]> Comment on Downloads by Joachim Nässlander http://nullsession.com/downloads/#comment-6 Joachim Nässlander Tue, 23 Aug 2011 11:01:01 +0000 http://www.nullsession.com/?page_id=820#comment-6 That’s fixed now, seems like the plugin didn’t like the wp upgrade :)

]]> Comment on NIC Teaming in Server Core or Hyper-V Server by AJBernard http://nullsession.com/2010/08/nic-teaming-in-server-core-or-hyper-v-server/#comment-204 AJBernard Mon, 08 Aug 2011 21:48:08 +0000 http://www.nullsession.com/?p=1087#comment-204 Please note that neither of these software options are supported by HP. HP only support the HP NCU for teaming.

]]> Comment on Downloads by Jeff http://nullsession.com/downloads/#comment-5 Jeff Tue, 26 Jul 2011 14:49:41 +0000 http://www.nullsession.com/?page_id=820#comment-5 Download links still not working 7/26/2011

]]> Comment on Deploying Windows at multiple locations with TFTPD and MDT by wes http://nullsession.com/2010/03/deploying-windows-at-multiple-locations-with-tftpd-and-mdt/#comment-195 wes Tue, 03 May 2011 21:34:51 +0000 http://www.nullsession.com/?p=1005#comment-195 Thanks, working through this now with a win7 deployment. Course bosses are telling me well usb installs were good enough for the one division it should be good enough for yours. You feel like a real it pro installing win7 by usb for an enterprise.

]]> Comment on Downloads by Brett http://nullsession.com/downloads/#comment-4 Brett Tue, 12 Apr 2011 14:11:17 +0000 http://www.nullsession.com/?page_id=820#comment-4 Download links for CCC R2 not working.

]]> Comment on SQL Server 2008 on Server Core 2008 R2 by pjh http://nullsession.com/2009/06/sql-server-2008-on-server-core-2008-r2/#comment-81 pjh Thu, 17 Mar 2011 04:45:22 +0000 http://www.nullsession.com/?p=414#comment-81 Great post!!! I did exactly as you described except with SQL 2008 R2 and only had to add the “/IAcceptSQLServerLicenseTerms” switch to the installation command. Thanks for blazing the trail!!

]]> Comment on Running Hyper-V Server 2008 R2 from USB by Joachim Nässlander http://nullsession.com/2009/09/running-hyper-v-server-2008-r2-from-usb/#comment-140 Joachim Nässlander Wed, 02 Mar 2011 17:59:18 +0000 http://www.nullsession.com/?p=654#comment-140 You could manage with a 4 GB I’d assume, it’s around 2.6 GB installed. I’ve just tried it with 16 GB USB-drives.

]]>